Lewis, Roger, Professor

Professor Roger Lewis

School of Mechanical, Aerospace and Civil Engineering

Professor of Mechanical Engineering

Roger.Lewis@sheffield.ac.uk
+44 114 222 7838

Sir Frederick Mappin Building

Full contact details

Professor Roger Lewis
School of Mechanical, Aerospace and Civil Engineering
Sir Frederick Mappin Building
Mappin Street
91̽��
S1 3JD

Profile

Professor Roger Lewis became a lecturer in the Department in 2002 and was promoted to Senior Lecturer in 2006, before becoming a Reader in 2011 and then being awarded a personal chair in 2013.

He graduated from 91̽�� in 1996 with an MEng in Mechanical Engineering and continued to work at 91̽�� towards a PhD in the Tribology Research Group. He then had posts as a Research Associate and Teaching Fellow in the Department.

In 2001 he was awarded the Tribology Trust Bronze Medal and in 2003 received a Brian Mercer Award for Innovation from the Royal Society. He also received the Institute of Physics Innovation in Tribology Prize in 2008. He was awarded the Donald Julius Groen Prize in Tribology in 2020. He is a Chartered Engineer and Fellow of the IMechE.

In 2019 Roger was made a Royal Academy of Engineering Research Chair. This position is co-funded by the Rail Safety and Standards Board and will focus on management of low adhesion in the wheel/rail interface.

Roger has edited an essential guide to wheel/rail contacts issues, 'The Wheel/Rail Interface Handbook' which is published by Woodhead.

Roger is a member of the Leonardo Tribology Centre.

Research interests

Roger's research interests are split into three areas: solving industrial wear problems; application and development of a novel ultrasonic technique for machine element contact analysis and design of engineering components and machines. The research themes are wide ranging, but the main focus is on:

Railway Engineering

Wheel/rail contact tribology – including wear (wheel profile evolution), RCF, friction management (use of top of rail friction modifiers; grease lubrication and traction gels), isolation and links to effective train detection
Rail infrastructure improvement – including laser cladding of rail to reduce wear/RCF; design and testing of insulated rail joints; overhead line wear testing
Condition monitoring – including real-time measurement of the wheel/rail contact; force measurement and detection of loosening in bolted joints.

Human Interactions

Fundamental characterization and modelling of skin friction including use of OCT to determine sub-surface skin strain
Hand/object interactions – including kitchen equipment, sports equipment etc. and effects that wearing medical examination gloves has on dexterity, grip and tactile discrimination
Human tissue interaction with medical devices including catheters
Pedestrian slips and falls, particularly barefoot slips and characterisation of flooring performance
Multi-scale modelling of skin to incorporate effects of moisture and temperature to optimise design of medical products that interface with skin.

Publications

Books

Lewis R & Dwyer-Joyce R (2002) Automotive Engine Valve Recession. Wiley.

Journal articles

Suhr B, Skipper WA, Lewis R & Six K (2024) . Computational Particle Mechanics, 11(5), 2353-2367.
Wagner R, Carré MJ, Perrault CM, Evans PC & Lewis R (2024) . Journal of The Royal Society Interface, 21(215).
Pereira HB, Echeverri EAA, Alves LHD, Yildirimli K, Lewis R & Goldenstein H (2024) . Wear, 546-547, 205324-205324.
Xie Y, Shi Z, Ding H, Meli E, Xue H, Liu Q, Lewis R & Wang W (2024) . Tribology International, 194, 109490-109490.
Lee ZS, Maiti R, Carré M & Lewis R (2024) . Tribology Letters, 72(2).
Zhang C, Nadimi S, Maramizonouz S, Milledge D & Lewis R (2024) . Journal of Tribology, 146(8).
Skipper W, Meierhofer A, Chalisey A, Six K & Lewis R (2024) . Wear, 542-543, 205278-205278.
Yildirimli K, Boschetti Pereira H, Goldenstein H, Fletcher DI, Lee ZS & Lewis R (2024) . Wear, 540-541, 205227-205227.
Abduraxman B, Hubbard P, Harrison T, Ward C, Fletcher D, Lewis R & White B (2024) . Vehicle System Dynamics, ahead-of-print(ahead-of-print), 1-20.
Zhang B, Nadimi S & Lewis R (2024) . Wear, 538-539, 205232-205232.
Lanigan JL, Faas L, Butcher T, Skipper WA, Silva MP, Lewis R & Gomez LD (2024) . Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 480.
Januschewsky M, Trummer G, Six K & Lewis R (2024) . Wear, 205268-205268.
Wang W, Huang J, Ding H, Wen Z, Cui X, Lewis R & Liu Q (2024) . Wear, 540-541.
Suhr B, Skipper WA, Lewis R & Six K (2024) . Powder Technology, 432, 119150-119150.
Mesaritis M, Cuervo P, Santa JF, Toro A & Lewis R (2023) . Wear, 530-531, 205051-205051.
Skipper W, Nadimi S, Gutsulyak DV, Butterfield JG, Ball T & Lewis R (2023) . Wear, 205116-205116.
Liu J, Yu P, Chen P, Chen S, Lewis R, Xu Z, Li P & He C (2023) . Engineering Failure Analysis, 150, 107326-107326.
Lewis R, Trummer G, Six K, Stow J, Alturbeh H, Bryce B, Shackleton P & Johnstone LB (2023) . Tribology International, 185, 108529-108529.
Evans MD, Lee ZS, Harmon M, Six K, Meierhofer A, Stock R, Gutsulyak DV & Lewis R (2023) . Wear, 205073-205073.
Nar K, Majewski C & Lewis R (2023) . Wear, 522, 204873-204873.
Maramizonouz S, Nadimi S, Skipper WA, Lewis SR & Lewis R (2023) . Computational Particle Mechanics, 1-11.
Folorunso MO, Watson M, Martin A, Whittle JW, Sutherland G & Lewis R (2023) . Journal of Tribology, 145(9).
Lanigan JL & Lewis R (2023) . RSC Advances, 13(15), 10322-10337.
Wang HH, Wang WJ, Han ZY, Wang Y, Ding HH, Lewis R, Lin Q, Liu QY & Zhou ZR (2023) . Wear, 204721-204721.
Wu B, Shi L, Ding H, Guo J, Liu Q, Zhou Z, Lewis R & Wang W (2023) . Wear, 204833-204833.
Zhu TF, Zhang H, Wang WJ, Lin Q, Wen ZF, Ding HH, Lewis R, Meli E & Liu QY (2023) . Wear, 204780-204780.
Zhou L, Luo Y-K & Lewis R (2023) . Smart Materials and Structures, 32(3), 034007-034007.
Suhr B, Skipper WA, Lewis R & Six K (2023) . Lubricants, 11(2).
Skipper WA, Nadimi S, Watson M, Chalisey A & Lewis R (2023) . Tribology International, 179, 108190-108190.
Hu Y, Wang WJ, Watson M, Six K, Al-Maliki H, Meierhofer A & Lewis R (2023) . Wear, 512-513.
Mesaritis M, Santa JF, Molina LF, Palacio M, Toro A & Lewis R (2023) . Tribology International, 177.
Tomlinson K, Fletcher DI & Lewis R (2022) . Tribology International.
Folorunso MO, Lewis R & Lanigan JL (2022) . Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit.
Bedoya-Zapata AD, León-Henao H, Mesaritis M, Molina LF, Palacio M, Santa JF, Rudas JS, Toro A & Lewis R (2022) . Wear, 502, 204371.
Hu Y, Tan DQ, Xu C, He Q, Yang XQ, Gao HY & Lewis R (2022) . Tribology International, 174.
White B, Lee ZS & Lewis R (2022) . Lubricants, 10(6).
Zhou L, Brunskill H & Lewis R (2022) . Ultrasonics, 124.
Uchegbulam I, Danby SG, Lewis R, Carré MJ & Maiti R (2022) . Journal of the Mechanical Behavior of Biomedical Materials, 127.
White B, Kempka R, Laity P, Holland C, Six K, Trummer G, Buckley-Johnstone L & Lewis R (2022) . Tribology Letters, 70(1).
Liu B, Bruni S & Lewis R (2022) . Wear, 490-491.
Nar K, Majewski C & Lewis R (2022) . Polymer Testing, 106.
Suhr B, Skipper WA, Lewis R & Six K (2022) . Granular Matter, 24(1).
Zhou L, Bai W, Han Z, Wang W, Hu Y, Ding H, Lewis R, Meli E, Liu Q & Guo J (2022) . Wear, 492-493.
Trummer G, Lee Z, Lewis R & Six K (2021) Modelling of Frictional Conditions in the Wheel–Rail Interface Due to Application of Top‐of‐Rail Products. Lubricants.
Mendoza JC, Vera Cardenas EE, Lewis R, Mai W, Avila Davila EO, Martinez-Perez AI, Ledesma S & Moreno Rios M (2021) . Polymers, 13(17).
Lewis R (2021) . Tribology - Materials, Surfaces & Interfaces, 15(2), 79-79.
Preece D, Hong Ng T, Tong HK, Lewis R & Carré MJ (2021) . Ergonomics.
Hu Y, Watson M, Maiorino M, Zhou L, Wang WJ, Ding HH, Lewis R, Meli E, Rindi A, Liu QY & Guo J (2021) . Wear.
Wagner RMF, Maiti R, Carré MJ, Perrault CM, Evans PC & Lewis R (2021) . Biotribology, 25.
Hu Y, Zhou L, Ding HH, Lewis R, Liu QY, Guo J & Wang WJ (2021) . Tribology International, 154.
Evans M, Skipper WA, Buckley-Johnstone L, Meierhofer A, Six K & Lewis R (2020) . Tribology International.
Preece D, Lewis R & Carré MJ (2020) . Biotribology, 24.
Hu Y, Guo LC, Maiorino M, Liu JP, Ding HH, Lewis R, Meli E, Rindi A, Liu QY & Wang WJ (2020) . Wear, 460-461.
Suhr B, Butcher T, Lewis R & Six K (2020) . Tribology International, 151.
Watson M, Lewis R & Slatter T (2020) . Tribology International, 151.
Mesaritis M, Shamsa M, Cuervo P, Santa J, Toro A, Marshall M & Lewis R (2020) . Wear, 456-457.
White B, Hyland-Knight J & Lewis R (2020) . Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit.
Hale J, O'Connell A, Lewis R, Carré MJ & Rongong JA (2020) . Tribology International.
Preece D, Lewis R & Carre M (2020) Efficiency of donning and doffing medical examination gloves. International Journal of Ergonomics, 10(1), 1-17.
FUKAGAI S, MA L & LEWIS R (2020) . Quarterly Report of RTRI, 61(3), 184-191.
Watson M, White B, Lanigan J, Slatter T & Lewis R (2020) . Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 476(2239), 20200057-20200057.
Arnall A, Fletcher D & Lewis R (2020) . Proceedings of the Institution of Civil Engineers: Transport, 173(4), 273-286.
Kumar Mandal N, Lewis R & Wen Z (2020) . Engineering Failure Analysis, 113.
Kempka R, Falconer R, Gutsulyak D & Lewis R (2020) . Tribology: Materials, Surfaces and Interfaces.
Ishizaka K, White B, Watson M, Lewis S & Lewis R (2020) . Wear.
Brunskill H, Hunter A, Zhou L, Dwyer-Joyce R & Lewis R (2020) . Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology.
Suhr B, Skipper W, Lewis R & Six K (2020) . Scientific Reports, 10.
Krier P, Lanigan J, Ferriday P & Lewis R (2020) Development and implementation of novel cryogenic railhead cleaning technology. Permanent Way Institution Journal, 138, 35-39.
Hu Y, Zhou L, Ding HH, Tan GX, Lewis R, Liu QY, Guo J & Wang WJ (2020) . Tribology International, 143.
Preece D, Lewis R & Carre M (2020) . Tribology: Materials, Surfaces and Interfaces.
Alturbeh H, Lewis R, Six K, Trummer G & Stow J (2020) . Tribology - Materials Surfaces & Interfaces.
Harmon M, Santa JF, Jaramillo JA, Toro A, Beagles A & Lewis R (2020) . Tribology - Materials, Surfaces & Interfaces.
Hale J, Lewis R & Carré MJ (2020) . Tribology International, 141.
Buckley-Johnstone LE, Trummer G, Voltr P, Six K & Lewis R (2020) . Tribology International, 141.
Carrell J, Lewis R & Slatter T (2020) . Tribology International, 141.
Lee ZS, Maiti R, Carre M & Lewis R (2019) . Biotribology.
Narayanan A, Mostafavi M, Pirling T, Kabra S, Lewis R, Pavier MJ & Peel MJ (2019) . Tribology International, 140.
Lu P, Lewis SR, Fretwell-Smith S, Engelberg DL, Fletcher DI & Lewis R (2019) . Wear, 438-439.
Maiti R, Duan MQ, Danby S, Lewis R, Matcher SJ & Carré MJ (2019) . Journal of the Mechanical Behavior of Biomedical Materials.
Earl S, Rankin KE, Lewis R, Smith L & Rainforth WM (2019) . Wear.
Zhu Y, Wang W-J, Lewis R, Yan W, Lewis S & Ding H (2019) . Journal of Tribology-Transactions of the ASME, 141(12).
Lai F, Qu S, Qin H, Lewis R, Slatter T, Li X & Luo H (2019) . Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology.
Skipper WA, Nadimi S, Chalisey A & Lewis R (2019) . Wear, 432-433.
Santa JF, Cuervo P, Christoforou P, Harmon M, Beagles A, Toro A & Lewis R (2019) . Wear, 432-433.
White B & Lewis R (2019) . Tribology International, 136, 475-486.
Lai F, Qu S, Lewis R, Slatter T, Fu W & Li X (2019) . International Journal of Fatigue, 125, 299-313.
Lewis R, Christoforou P, Wang WJ, Beagles A, Burstow M & Lewis SR (2019) . Wear, 430-431, 383-392.
Zhou L, Brunskill H, Pletz M, Daves W, Scheriau S & Lewis R (2019) . Journal of Tribology-Transactions of the ASME, 141(6).
Skipper W, Chalisey A & Lewis R (2019) . Proceedings of the Institution of Mechanical Engineers. Part F: Journal of Rail and Rapid Transit.
Farfan-Cabrera L, Gallardo-Hernández E, Marín-Santibáñez B, Pérez-González J & Lewis R (2019) . Wear, 426-427(Part A), 910-918.
Watson M, Christoforou P, Herrera P, Preece D, Carrell J, Harmon M, Krier P, Lewis S, Maiti R, Skipper W , Taylor E et al (2019) . Wear, 426-427(Part B), 1712-1718.
Fukagai S, Ma L & Lewis R (2019) . Wear, 424-425, 223-232.
Lai F, Qu S, Lewis R, Slatter T, Sun G, Zhang T & Li X (2019) . Materials, 12(7).
Fukagai S, Brunskill HP, Hunter AK, Dwyer-Joyce RS & Lewis R (2019) . Tribology International.
Stephen TJ, Lewis R, Marshall MB, Beaty P & Hardwick C (2019) . Proceedings of the Institution of Mechanical Engineers. Part F: Journal of Rail and Rapid Transit, 233(3), 251-261.
Buckley-Johnstone LE, Trummer G, Voltr P, Meierhofer A, Six K, Fletcher DI & Lewis R (2019) . Tribology International.
Zhou L, Brunskill H & Lewis R (2019) . International Journal of Structural Health Monitoring.
Buckley-Johnstone L, Harmon M, Lewis R, Hardwick C & Stock R (2019) . Proceedings of the Institution of Mechanical Engineers. Part F: Journal of Rail and Rapid Transit, 233(2), 201-210.
Harmon M, Powell B, Barlebo-Larsen I & Lewis R (2019) . Tribology Transactions, 1-11.
Lai F, Qu S, Duan Y, Slatter T, Lewis R, YIn L, Li X, Luo H & Sun G (2018) . Tribology International, 128, 75-88.
Skipper W, Chalisey A & Lewis R (2018) . Tribology: Materials, Surfaces and Interfaces.
Ishizaka K, Lewis S, Hammond D & Lewis R (2018) . RSC Advances, 8(57), 32506-32521.
Ding J, Lewis R, Beagles A & Wang J (2018) . Wear, 402-403, 71-79.
Abdulqadir LB, Binti Mohd Nor N, Lewis R & Slatter T (2018) . Tribology: Materials, Surfaces and Interfaces.
Bahari A, Lewis R & Slatter T (2018) . Tribology Transactions, 61(2), 207-219.
Byers RA, Maiti R, Danby SG, Pang EJ, Mitchell B, Carré MJ, Lewis R, Cork MJ & Matcher SJ (2018) . Biomedical Optics Express, 9(4), 2001-2001.
Bahari A, Lewis R & Slatter T (2018) . Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology, 232(3), 244-258.
Liu X, Carre MJ, Zhang Q, Lu Z, Matcher SJ & Lewis R (2018) . Skin Research and Technology, 24(1), 31-44.
Kang Y, Dong L, Lewis R, Xiang B & Liu X (2018) Experimental study on friction and wear performance of 45 steel and GCr15 steel under the condition of permanent magnetic field. Journal of the Balkan Tribological Association, 24(1), 23-30.
Lewis S, Riley S, Fletcher DI & Lewis R (2018) . Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 232(1), 43-62.
Bahari A, Lewis R & Slatter T (2018) . Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 232(1), 190-203.
Bostan L, Noble C, Smulders N, Lewis R, Carre , Franklin SE, Green N & MacNeil S (2017) . Biotribology, 12, 24-32.
Temple PD, Harmon M, Lewis R, Burstow MC, Temple B & Jones D (2017) . Proceedings of the Institution of Mechanical Engineers. Part F: Journal of Rail and Rapid Transit.
Stephen J, Marshall M & Lewis R (2017) . Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 231(18), 3462-3475.
Harwick C, Lewis R & Stock R (2017) . Wear, 384-385, 50-60.
Lewis R, Magel E, Wang W-J, Olofsson U, Lewis SR, Slatter T & Beagles A (2017) . Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 231(7), 760-774.
Liu X, Maiti R, Lu ZH, Carré MJ, Matcher SJ & Lewis R (2017) . Biotribology.
Noble C, van der Sluis O, Voncken RMJ, Burke O, Franklin SE, Lewis R & Taylor ZA (2017) . J Mech Behav Biomed Mater, 71, 95-105.
Lewis S, Lewis R, Goodwin PS, Fretwell-Smith S, Fletcher DI, Murray K & Jaiswal J (2017) . Wear, 376-377(B), 1930-1937.
Gill WS, Marshall MB, Lewis R, Hall B & Bolton S (2017) . Tribology International.
Carre MJ, Tan SK, Mylon PT & Lewis R (2017) . Wear, 376-377(A), 324-328.
Wang WJ, Lewis R, Evans MD & Liu QY (2017) . Tribology Letters, 65.
Ishizaka K, Lewis S & Lewis R (2017) . Wear, 378-379, 183-197.
White BT, Nilsson R, Olofsson O, Armitage T, Fisk J, Arnall AD, Evans ME, Fletcher DI & Lewis R (2017) . Proceedings of the Institution of Mechanical Engineers. Part F: Journal of Rail and Rapid Transit.
Trummer G, Buckley-Johnstone LE, Voltr P, Meierhofer A, Lewis R & Six K (2017) . Tribology International, 109, 409-415.
Lewis SR, Riley, S, Fletcher DI & Lewis R (2017) . The International Journal of Railway Technology, 6(2), 87-98.
Wang W-J, Lewis SR, Lewis R, Beagles , He CG & Liu QY (2017) . Wear, 376-377(B), 1892-1900.
Popplewell H, Carre & Lewis R (2017) . Wear, 376-377(A), 295-304.
Carrell J, Slatter T, Little U & Lewis R (2017) . SAE Technical Papers.
Vera-Cardenas EE, Lewis R & Slatter T (2017) . Open Journal of Applied Sciences, 7(2), 42-49.
Vera-Cardenas EE, Lewis R & Slatter T (2017) . Open Journal of Applied Sciences, 7(2), 50-56.
Mylon P, Carré MJ, Martin N & Lewis R (2017) . Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 231(1), 28-39.
Stock R, Stanlake L, Hardwick C, Yu M, Eadie D & Lewis R (2016) . Wear, 366-367, 225-232.
Lewis SR, Fretwell-Smith S, Goodwin PS, Smith L, Lewis R, Aslam M, Fletcher DI, Murray K & Lambert R (2016) . Wear, 366-367, 268-278.
Noble C, Smulders N, Lewis R, Carre MJ, Franklin SE, MacNeil S & Taylor ZA (2016) . Journal of Biomechanics, 49(15), 3667-3675.
Mylon P, Lewis R, Carre MJ & Martin N (2016) . Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 230(16), 2896-2912.
Marzia A, Cremona MA, Liu B, Hu Y, Bruni S & Lewis R (2016) . Reliability Engineering and System Safety, 154, 49-59.
Wang WJ, Lewis R, Yang B, Guo LC, Liu QY & Zhu MH (2016) . Wear, 362-363, 146-152.
Maiti R, Gerhardt L-C, Lee ZS, Byers RA, Woods D, Sanz-Herrera JA, Franklin SE, Lewis R, Matcher SJ & Carré MJ (2016) . Journal of the Mechanical Behavior of Biomedical Materials, 62, 556-569.
Harmon M & Lewis R (2016) . Tribology: Materials, Surfaces & Interfaces, 10(3), 150-162.
Bostan LE, Taylor ZA, Carré MJ, MacNeil S, Franklin SE & Lewis R (2016) . Tribology International, 103, 487-495.
Noble C, Smulders N, Green NH, Lewis R, Carre M, Franklin S, MacNeil S & Taylor Z (2016) . Journal of the Mechanical Behavior of Biomedical Materials, 60, 378-393.
El Shukri F & Lewis R (2016) An Experimental Investigation and Improvement of Insulated Rail Joints. Tribology in Industry, 38(1), 121-126.
Beaty P, Temple B, Marshall MB & Lewis R (2016) . Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 230(4), 1375-1387.
Mylon P, Lewis R, Carré MJ & Martin N (2016) . International Journal of Industrial Ergonomics, 53, 115-123.
Santa JF, Toro A & Lewis R (2016) . Tribology International, 95, 5-12.
Vera Cárdenas EE, Lewis R, Martínez Pérez AI, Bernal Ponce JL, Pérez Pinal FJ, Domínguez MO & Rivera Arreola ED (2016) . Advances in Mechanical Engineering, 8(2), 168781401663025-168781401663025.
Lewis SR, Lewis R, Cotter J, Lu X & Eadie DT (2016) . Wear, 366-367, 258-267.
Brunskill H, Harper P & Lewis R (2015) . Wear, 332-333, 1129-1133.
Lewis SR, Lewis R & Fletcher DI (2015) . Wear, 330-331, 581-591.
Liu X, Gad D, Lu Z, Lewis R, Carré MJ & Matcher SJ (2015) . Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 229(3), 294-311.
Mylon PT, Buckley-Johnstone L, Lewis R, Carré MJ & Martin N (2015) . Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 229(3), 273-284.
Ortiz-Domínguez M, Elias-Espinosa M, Keddam M, Gómez-Vargas OA, Lewis R, Vera-Cárdenas EE & Zuno-Silva J (2015) Growth kinetics and mechanical properties of Fe2B layers formed on AISI D2 steel. Indian Journal of Engineering and Materials Sciences, 22(2), 231-243.
Clarke JD, Hallas K, Lewis R, Thorpe S, Hunwin G & Carré MJ (2015) . Journal of Testing and Evaluation, 43(4), 20120334-20120334.
Dong L, Lewis R, Li CX, Zhu WB & Wang HS (2015) . Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 229(9), 1086-1094.
Mohammed A, Marshall MB & Lewis R (2015) . Wear, 332-333, 1215-1224.
Singleton R, Marshall MB, Lewis R & Evans G (2015) . Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 229(5), 457-465.
Hardwick C, Lewis R & Olofsson U (2014) . Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 228(8), 887-897.
Hardwick C, Lewis S & Lewis R (2014) . Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 228(7), 768-783.
Lewis SR, Lewis R, Richards P & Buckley-Johnstone LE (2014) . Wear, 314(1-2), 213-219.
Stephen JT, Marshall MB & Lewis R (2014) . Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228(18), 3405-3418.
Dong L, Zhong W, Chen GX & Lewis R (2014) . Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 228(3), 323-330.
Lewis R, Carré MJ & Tomlinson SE (2014) . Procedia Engineering, 72, 611-617.
Mylon P, Lewis R, Carré MJ, Martin N & Brown S (2014) . American Journal of Infection Control, 42(1), 48-54.
Mylon P, Lewis R, Carré MJ & Martin N (2014) . Ergonomics, 57(1), 116-129.
Lewis SR, Lewis R, Buckley-Johnstone LE & Evans G (2013) . Wear.
Thornton R, Slatter T & Lewis R (2013) . Production Engineering, 1-10.
Canty LA, Lewis R & Yoxall A (2013) . Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 227(5), 1056-1068.
Lewis SR, Lewis R, Olofsson U, Eadie DT, Cotter J & Lu X (2013) . Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 227(2), 115-127.
Lewis R, Lewis SR, Zhu Y, Abbasi S & Olofsson U (2013) . Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 227(2), 196-200.
Dwyer-Joyce RS, Yao C, Lewis R & Brunskill H (2013) . PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT, 227(F2), 188-195.
Hardwick C, Lewis R & Eadie DT (2013) . Wear.
Olofsson U, Zhu Y, Abbasi S, Lewis R & Lewis S (2013) . Vehicle System Dynamics, 51(7), 1091-1120.
Tomlinson SE, Lewis R, Carré MJ & Franklin SE (2013) . Wear.
Laguna-Camacho JR, Lewis R, Vite-Torres M & Méndez-Méndez JV (2013) . Wear.
Meierhofer A, Six K, Hardwick C, Lewis R & Dietmaier P (2013) . Wear.
Carre MJ, Tomlinson SE, Collins JW & Lewis R (2012) . PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 226(J7), 616-625.
Lewis R, Dwyer-Joyce RS, Lewis SR, Hardwick C & Gallardo-Hernandez EA (2012) . International Journal of Railway Technology, 1(1), 167-194.
Liu X, Lewis R, Carré MJ, Lu Z & Matcher SJ (2012) . Tribology International.
Bergseth E, Olofsson U, Lewis R & Lewis S (2012) . Tribology Letters, 1-18.
Lewis R, Carré MJ, Abu Bakar A & Tomlinson SE (2012) . Tribology International.
Rovira A, Roda A, Lewis R & Marshall MB (2012) . Wear, 274-275, 109-126.
Marshall MB, Lewis R, Howard T & Brunskill H (2011) . Journal of Mechanical Engineering Sciences, Proceedings of the IMechE Part C.
Slatter T, Lewis R & Jones AH (2011) . Wear, 271(9-10), 1481-1489.
Thornton R, Slatter T, Jones AH & Lewis R (2011) . Wear, 271(9-10), 2386-2395.
Rovira A, Roda A , Marshall MB, Brunskill HB & Lewis R (2011) . Wear, 271(5-6), 911-924.
Slatter T, Lewis R & Broda M (2011) , 124-129.
Slatter T, Lewis R & Jones AH (2011) . Wear, 270(3-4), 302-311.
Vera-Cárdenas EE, Vite-Torres M & Lewis R (2011) Surface and Sliding Wear Behaviour of Different Coatings and Steels. Ingenieria Investigación y Tecnologica, XIII, 85-96.
Tomlinson SE, Carré MJ, Lewis R & Franklin SE (2011) . Wear, 271(9-10), 2346-2353.
Lewis R, Tsoraki C, Broughton J, Cripps JC, Afodun SA, Slatter T & Roubos V (2011) . Wear, 271(9-10), 2549-2560.
Zorcolo A, Lewis R & Dwyer-Joyce RS (2011) . Wear, 271(9-10), 2579-2587.
Houghton A, Lewis R, Olofsson U & Sundh J (2011) . Wear, 271(9-10), 1671-1680.
Vera EE, Vite M, Lewis R, Gallardo EA & Laguna-Camacho JR (2011) . Wear, 271(9-10), 2116-2124.
Lewis SR, Lewis R & Olofsson U (2011) . Wear, 271(1-2), 62-70.
Lewis R, Gallardo EA, Cotter J & Eadie DT (2011) . Wear, 271(1-2), 71-77.
Arias-Cuevas O, Li Z & Lewis R (2011) . Wear, 271(1-2), 14-24.
Pombo J, Ambrósio J, Pereira M, Lewis R, Dwyer-Joyce R, Ariaudo C & Kuka N (2011) . Wear, 271(1-2), 238-245.
Tomlinson SE, Lewis R, Liu X, Texier C & Carré MJ (2011) . Tribology Letters, 41(1), 283-294.
Marshall MB, Zainal I & Lewis R (2011) . Strain, 47(SUPPL. 2), 65-78.
Pombo J, Ambrosio J, Pereira M, Lewis R, Dwyer-Joyce R, Ariaudo C & Kuka N (2010) . MULTIBODY SYST DYN, 24(3), 347-366.
Arias-Cuevas O, Li Z & Lewis R (2010) . TRIBOL LETT, 37(3), 623-635.
Langley J, Yoxall A, Heppell G, Rodriguez EM, Bradbury S, Lewis R, Luxmoore J, Hodzic A & Rowson J (2010) . Waste Manag Res, 28(3), 220-227.
Tassini N, Quost X, Lewis R, Dwyer-Joyce R, Ariaudo C & Kuka N (2010) . WEAR, 268(5-6), 660-667.
Arias-Cuevas O, Li Z, Lewis R & Gallardo-Hernandez EA (2010) . WEAR, 268(3-4), 543-551.
Pombo J, Ambrósio J, Pereira M, Lewis R, Dwyer-Joyce R, Ariaudo C & Kuka N (2010) A study on wear evaluation of railway wheels based on multibody dynamics and wear computation. Multibody System Dynamics, 1-20.
Chiang WK, Ghassemieh E, Lewis R, Rowson J & Thompson C (2010) . Journal of Adhesion Science and Technology, 24(11-12), 1949-1957.
Pombo J, Ambrosio J, Pereira M, Lewis R, Dwyer-Joyce R, Ariaudo C & Kuka N (2010) A RAILWAY WHEEL WEAR PREDICTION TOOL BASED ON A MULTIBODY SOFTWARE. JOURNAL OF THEORETICAL AND APPLIED MECHANICS, 48(3), 751-770.
Arias-Cuevas O, Li Z, Lewis R & Gallardo-Hernandez EA (2010) . P I MECH ENG F-J RAI, 224(F3), 139-157.
Dwyer-Joyce RS, Goodman MA & Lewis R (2010) . P I MECH ENG J-J ENG, 224(J6), 519-528.
Lewis R, Dwyer-Joyce RS, Olofsson U, Pombo J, Ambrosio J, Pereira M, Ariaudo C & Kuka N (2010) . P I MECH ENG F-J RAI, 224(F3), 125-137.
Yoxall A, Langley J, Janson R, Lewis R, Wearn J, Hayes SA & Bix L (2010) . PACKAG TECHNOL SCI, 23(1), 11-18.
Slatter T, Lewis R & Taylor H (2009) Laser treatment for improved impact wear resistance. The Laser User Magazine(56), 30-31.
Dwyer-Joyce RS, Yao C, Zhang J, Lewis R & Drinkwater BW (2009) . J TRIBOL-T ASME, 131(4).
Lewis R, Rahim M, Cripps J, Roubos V & Tsoraki C (2009) . WEAR, 267(5-8), 1325-1332.
Gallardo EA & Lewis R (2009) . WEAR, 267(5-8), 1009-1021.
Tomlinson SE, Lewis R & Carre MJ (2009) . WEAR, 267(5-8), 1311-1318.
Camacho J, Lewis R & Dwyer-Joyce RS (2009) . WEAR, 267(1-4), 223-232.
Slatter T, Taylor H, Lewis R & King P (2009) . WEAR, 267(5-8), 797-806.
Lewis R, Gallardo-Hernandez EA, Hilton T & Armitage T (2009) . P I MECH ENG F-J RAI, 223(3), 275-283.
Lewis R (2009) . WEAR, 266(7-8), 888-892.
Li Z, Arias-Cuevas O, Lewis R & Gallardo-Hernandez EA (2009) . TRIBOL LETT, 33(2), 97-109.
Tomlinson SE, Lewis R, Ball S, Yoxall A & Carré MJ (2009) . Sports Engineering, 11(3), 109-118.
Gallardo-Hernandez EA & Lewis R (2008) . WEAR, 265(9-10), 1309-1316.
Green DA & Lewis R (2008) . P I MECH ENG D-J AUT, 222(D9), 1669-1689.
Lewis R, Yoxall A & Marshall MB (2008) . P I MECH ENG C-J MEC, 222(7), 1125-1130.
Lewis R, Yoxall A, Marshall MB & Canty LA (2008) . WEAR, 264(1-2), 37-46.
Tomlinson SE, Lewis R & Carre MJ (2007) . P I MECH ENG J-J ENG, 221(J8), 841-850.
Lewis R, Yoxall A, Canty LA & Romo ER (2007) . J FOOD ENG, 83(3), 356-365.
Green DA & Lewis R (2007) . JOURNAL OF PHYSICS D-APPLIED PHYSICS, 40(18), 5488-5501.
Camacho J, Lewis R & Dwyer-Joyce RS (2007) . WEAR, 263, 65-73.
Lewis R, Barber SC & Dwyer-Joyce RS (2007) . WEAR, 263, 188-197.
Lewis R, Menardi C, Yoxall A & Langley J (2007) . WEAR, 263, 1124-1132.
Green DA, Lewis R & Cripps J (2007) . WEAR, 263, 57-64.
Lewis R (2007) . WEAR, 262(11-12), 1516-1521.
Yoxall A, Luxmoore J, Austin M, Canty L, Margrave KJ, Richardson CJ, Wearn J, Howard IC & Lewis R (2007) . PACKAG TECHNOL SCI, 20(3), 217-229.
Braghin F, Lewis R, Dwyer-Joyce RS & Bruni S (2006) . WEAR, 261(11-12), 1253-1264.
Lewis R & Dwyer-Joyce RS (2006) . P I MECH ENG J-J ENG, 220(J8), 755-765.
Gallardo-Hernandez EA, Lewis R & Dwyer-Joyce RS (2006) . TRIBOLOGY INTERNATIONAL, 39(12), 1653-1663.
Marshall MB, Lewis R, Dwyer-Joyce RS, Olofsson U & Bjorklund S (2006) . J TRIBOL-T ASME, 128(3), 493-504.
Green DA, Lewis R & Dwyer-Joyce RS (2006) . P I MECH ENG J-J ENG, 220(J3), 159-169.
Lewis R & Masing J (2006) . P I MECH ENG F-J RAI, 220(1), 43-53.
Lewis R & Dwyer-Joyce RS (2006) . P I MECH ENG F-J RAI, 220(1), 29-41.
Marshall MB, Lewis R & Dwyer-Joyce RS (2006) Characterisation of contact pressure distribution in bolted joints. STRAIN, 42(1), 31-43.
Lewis R & Dwyer-Joyce RS (2005) . P I MECH ENG J-J ENG, 219(J1), 1-18.
Lewis R, Marshall MB & Dwyer-Joyce RS (2005) . P I MECH ENG C-J MEC, 219(2), 127-139.
Lewis R & Dwyer-Joyce RS (2005) . Proceedings of the I MECH E Part J Journal of Engineering Tribology, 219(1), 2-19.
Lewis R & Dwyer-Joyce RS (2004) Wear mechanisms and transitions in railway wheel steels. P I MECH ENG J-J ENG, 218(J6), 467-478.
Lewis R & Olofsson U (2004) . WEAR, 257(7-8), 721-729.
Marshall MB, Lewis R & Drinkwater W (2004) . The Journal of Strain Analysis for Engineering Design, 39(6), 745-750.
Lewis R, Dwyer-Joyce RS & Pickles MJ (2004) . WEAR, 257(3-4), 368-376.
Marshall MB, Lewis R, Drinkwater BW & Dwyer-Joyce RS (2004) An ultrasonic approach for contact stress mapping in machine joints and concentrated contacts. J STRAIN ANAL ENG, 39(4), 339-350.
Lewis R, Dwyer-Joyce R, Slatter T & Brooks A (2004) Valve recession: From experiment to predictive model. VDI Berichte(1813), 79-93.
Lewis R & Dwyer-Joyce RS (2003) Combating automative engine valve recession. TRIBOL LUBR TECHNOL, 59(10), 48-51.
Lewis R & Dwyer-Joyce RS (2003) Combating automotive engine valve recession. Lubrication Engineering, 59(10), 48-51.
Lewis R, Dwyer-Joyce RS & Lewis J (2003) Disc machine study of contact isolation during railway track sanding. P I MECH ENG F-J RAI, 217(1), 11-24.
Lewis R & Dwyer-Joyce RS (2002) Wear of diesel engine inlet valves and seat inserts. P I MECH ENG D-J AUT, 216(D3), 205-216.
Jaffé J, Lanigan J & Lewis R () . Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit.
WU B, LI J, ZHANG S, SHI L, DING H, LIN Q, WANG W, GUO J, ZHOU Z, LEWIS R & ZHOU J () . Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit.
Maramizonouz S, Nadimi S & Lewis R () . Acta Mechanica, 1-11.
Clarke B, Tomlinson K, Karunakaran A, Canden A, Slatter J, Slatter T, Carre M & Lewis R () The Effectiveness of Chalk as a Friction Modifier for Finger Pad Contact with Rocks of Varying Roughness. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology.
Wilby APG, Corteen J, Lewis R & Fletcher DI () . Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit.
Jaffe J, White B, Lanigan J & Lewis R () A Novel Methodology for Developing Ultra-Low Adhesion Leaf Layers on a Full-Scale Wheel/Rail Rig. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit.
White B, Lewis R, Fletcher D, Harrison T, Hubbard P & Ward C () . Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit.
Lee ZS, Trummer G, Harmon M, White B, Six K & Lewis R () . Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit.
Maramizonouz S, Nadimi S, Skipper W & Lewis R () . Scientific Data, 10(1), 400.
Morecroft R, Tomlinson K, Lewis R & Carré M () . Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 095441192311784-095441192311784.
Wilby A, Corteen J, Lewis S, Lewis R & Fletcher DI () . Wear.
Maramizonouz S, Nadimi S, Skipper W & Lewis R () . Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 095440972311647-095440972311647.
Slatter T, Zalzalah M & Lewis R () Analysis of Reciprocating Hammer Type Impact Wear Apparatus. Wear.
Zhang B, Lewis R & Marshall M () Investigating Al-Si base Abradable Material Removal Mechanism with Axial Movement in Labyrinth Seal System. Wear.
White B, Watson M & Lewis R () A Year-Round Analysis of Railway Station Overruns due to Low Adhesion Conditions. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit.
Fukagai S, Marshall M & Lewis R () Transition of the Friction behaviour and Contact Stiffness due to Repeated High-Pressure Contact and Slip. Tribology International.
Krier P, White BT, Ferriday P, Watson M, Buckley-Johnstone L, Lewis R & Lanigan JL () Field trials of cryogenic cleaning using a road-to-rail vehicle with assessment of the effects on both DMU braking and rail head cleaning. Proceedings of the Institution of Civil Engineers: Civil Engineering.
Hardwick C, Lewis R, Eadie DT & Rovira A () . Proceedings of the First International Conference on Railway Technology: Research, Development and Maintenance.
Marshall MB, Lewis R, Dwyer-Joyce RS, Demilly F & Flament Y () . Proc. I.Mech.E. part F, 225, 287-298.
Slatter T, Lewis R & Dwyer-Joyce RS () . SAE Technical Paper Series.
Dwyer-Joyce RS, Green DA, Harper P, Lewis R, Balakrishnan S, King PD, Rahnejat H & Howell-Smith S () . SAE Technical Paper Series.
Green DA, Lewis R & Dwyer-Joyce RS () . SAE Technical Paper Series.
Dwyer-Joyce RS, Lewis R, Ward A & Patterson EA () . SAE Technical Paper Series.
Green DA, Lewis R, Marshall MB & Dwyer-Joyce RS () . SAE Technical Paper Series.
Lewis R & Dwyer-Joyce RS () . SAE Technical Paper Series.
Lewis R, Dwyer-Joyce RS & Josey G () . SAE Technical Paper Series.
Zalzalah M, Lewis R & Slatter T () Defining The Role of 'Zero Wear Volume' in Percussive Impact. Wear.
Harmon M & Lewis R () . Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 095440972091375-095440972091375.
Christoforou P, Fletcher DI & Lewis R () . Wear.
Bedoya-Zapata AD, Rojas-Parra S, Díaz-Mazo JH, García-Jiménez JA, León-Henao H, López-Londoño JE, Vergara-Puello RA, Molina LF, Santa JF, Toro A , Mesaritis M et al () Case study: understanding the formation of squat-type defects in a metropolitan railway. Engineering Failure Analysis.
Al-Maliki H, Meierhofer A, Trummer G, Lewis R & SIx K () A New Approach for Modelling Mild and Severe Wear in Wheel-Rail Contacts. Wear.
Davison S, Hill R, Taghizadeh S & Lewis R () The theoretical optimization of the arrangement of sandwich filling components. Tribology International.
Lanigan J, Krier P, Buckley-Johnstone L, White B, Ferriday P & Lewis R () FIELD TRIALS OF A METHODOLOGY FOR LOCOMOTIVE BRAKE TESTING TO ASSESS FRICTION ENHANCEMENT IN THE WHEEL/RAIL INTERFACE USING A REPRESENTATIVE LEAF LAYER. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit.
Farfan-Cabrera L, Gallardo-Hernandez E, Perez-Gonzalez J, Marin-Santibanez B, Lewis R & Gonzalez-Lamas A () Evaluation of Thermo-Oxidized Jatropha Bio-Oil in Lubrication of Actual Wet Clutch Materials. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology.
Tomlinson K, Fletcher D & Lewis R () Measuring material plastic response to cyclic loading in modern rail steels from a minimal number of twin-disc tests. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit.
Hale J, Lewis R & Carre M () Effect of Tennis Steps and Slides on Tread Element Friction and Wear. Sports Engineering.
Christoforou P, Dowding R, Pinna C & Lewis R () Two-Layer Laser Clad Coating as a Replacement for Chrome Electroplating on Forged Steel. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Zalzalah M, Lewis R & Slatter T () A New Predictive Model for Normal and Compound Impact Wear. Wear.
Zhang B, Lewis R & Marshall M () An Investigation into the Role of Specimen Geometry when Undertaking Tribological Testing on Seal Fin Components. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Fukagai S, Watson M, Brunskill H, Hunter A, Marshall M & Lewis R () In-situ Evaluation of Contact Stiffness in a Slip Interface with different Roughness Conditions using Ultrasound Reflectometry. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

Chapters

Hartwich D, Müller G, Meierhofer A, Obadic D, Rosenberger M, Lewis R & Six K (2022) , Lecture Notes in Mechanical Engineering (pp. 552-560). Springer International Publishing
Lewis R, Zalzalah M & Slatter T (2021) , Failure Analysis and Prevention (pp. 730-744). ASM International
Maiti R, Lewis R, Parker D & Carré MJ (2021) , The Science, Etiology and Mechanobiology of Diabetes and its Complications (pp. 161-171). Elsevier
Lee ZS, Trummer G, Six K & Lewis R (2020) , Lecture Notes in Mechanical Engineering (pp. 669-677). Springer International Publishing
Lewis R & Ashcroft AT (2013) , Encyclopedia of Tribology (pp. 3892-3896). Springer US
Clarke JD, Lewis R & Carré MJ (2013) , Encyclopedia of Tribology (pp. 3825-3830). Springer US
Lewis R & Slatter T (2012) , Automotive Lubricants and Testing (pp. 293-315).
Lewis S & Dwyer-Joyce RS (2009) Wheel-Rail Interface Handbook In Lewis R (Ed.), Wheel-Rail Interface Handbook CRC PressI Llc
Lewis SR & Dwyer-Joyce RS (2009) In Lewis R & Olofsson U (Ed.), Wheel-Rail Interface Handbook (pp. 437-455).
Lewis R & Olofsson U (2009) , Wheel-Rail Interface Handbook (pp. 34-57).
Braghin F, Bruni S & Lewis R (2009) , Wheel-Rail Interface Handbook (pp. 172-210).
Lewis R (2009) , Wheel-Rail Interface Handbook (pp. 528-549).
Tomlinson SE, Lewis R & Carré MJ (2009) , The Engineering of Sport 7 (pp. 27-34). Springer Paris
Olofsson U & Lewis R (2006) Tribology of the wheel-rail contact, Handbook of Railway Vehicle Dynamics (pp. 121-142).
Dwyer-Joyce R & Lewis R (2006) , Handbook of Lubrication and Tribology CRC Press
Lewis R & Dwyer-Joyce R (2002) , Failure Analysis and Prevention (pp. 965-974).

Conference proceedings papers

Cuervo PA, Toro A, Meza JM, Santa JF & Lewis R (2023) . Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit (pp 923-932)
Bernal E, Spiryagin M, Stichel S, Bosso N, Lewis R, Bosomworth C, Wu Q & Cole C (2022) . 2022 Joint Rail Conference, 20 April 2022 - 21 April 2022.
Taiwo G, Marshall M, Mesaritis M & Lewis R (2022) AN EXPERIMENTAL INVESTIGATION INTO THE SUPERABRASIVE GRINDING OF RAIL. CM 2022 - 12th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Conference Proceedings (pp 358-363)
Lewis R, Mesaritis M, Taiwo G, Marshall M, Krier P, Ferriday P, Buckley-Johnstone L, Lanigan J, Lewis S, Yildirimli K , Lu P et al (2022) IMPROVING THE WHEEL/RAIL CONTACT PERFORMANCE THROUGH LASER CLADDING OF RAIL, HIGH SPEED RAIL GRINDING AND RAIL CLEANING: CASE STUDIES IN GOING FROM THE LAB TO THE FIELD. CM 2022 - 12th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Conference Proceedings (pp 477-483)
Lewis R, Evans M, Six K, Meierhofer A, Stock R & Gutsulyak D (2022) TOP-OF-RAIL FRICTION MODIFIER PERFORMANCE ASSESSMENT: HIGH PRESSURE TORSION TESTING; CREEP FORCE MODELLING AND FIELD VALIDATION. CM 2022 - 12th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Conference Proceedings (pp 797-802)
Yildirimli K, Tomlinson K, Fletcher D & Lewis R (2022) SMALL-SCALE TESTING OF RAIL LASER CLADDING LONGEVITY, PARAMETER TOLERANCE AND IN-SITU REPAIRS IN PREPARATION FOR FIELD IMPLEMENTATION. CM 2022 - 12th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Conference Proceedings (pp 364-374)
Zhang B, Nadimi S & Lewis R (2022) MODELLING ADHESION ENHANCEMENT IN WHEEL-RAIL CONTACT TRIGGERED BY SAND PARTICLES. CM 2022 - 12th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Conference Proceedings (pp 516-521)
Cuervo PA, Meza JM, Toro A & Lewis R (2022) EFFECT OF SURFACE TEXTURE ON CONTACT CONDITIONS AND TRIBOLOGICAL BEHAVIOR OF SIMULATED WHEEL-RAIL PAIRS IN A TWIN-DISC MACHINE. CM 2022 - 12th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Conference Proceedings (pp 142-152)
Wilby A, Corteen J, Lewis S, Lewis R & Fletcher D (2022) EFFICIENT LABORATORY TEST PROGRAMME FOR CHARACTERISING RAIL STEEL STRAIN ACCUMULATION. CM 2022 - 12th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Conference Proceedings (pp 62-70)
Skipper W, Meierhofer A, Chalisey A, Six K & Lewis R (2022) GENERATION OF SANDED CREEP CURVES USING THE EXTENDED CREEP FORCE MODEL WITH HIGH PRESSURE TORSION DATA. CM 2022 - 12th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Conference Proceedings (pp 782-788)
Skipper W, Nadimi S, Gutsulyak DV, Butterfield JG & Lewis R (2022) INVESTIGATING THE EFFECT OF DIFFERENT ADHESION MATERIALS ON ELECTRICAL RESISTANCE USING A HIGH PRESSURE TORSION RIG. CM 2022 - 12th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Conference Proceedings (pp 528-534)
Mesaritis M, Cuervo P, Santa JF, Toro A & Lewis R (2022) ASSESSMENT OF RAIL GRINDING MAINTENANCE FOR PREMIUM RAIL GRADES IN LABORATORY. CM 2022 - 12th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Conference Proceedings (pp 827-837)
Corniani G, Lee Z, Carre MJ, Lewis R, Delhaye BP & Saal HP (2022) Imaging Sub-surface Skin Strain Patterns During Fingertip Sliding. HAPTICS: SCIENCE, TECHNOLOGY, APPLICATIONS, EUROHAPTICS 2022, Vol. 13235 (pp 358-361)
Maiti R, Wagner R, Martinez Sanchez NA, Ramirez-Reivich A, Ellison P, Perrault C, Carre MJ, Dwyer-Joyce R, Neville A & Lewis R (2019) . 7th International Conference on the Development of Biomedical Engineering in Vietnam (BME7) (pp 213-216). Ho Chi Minh City, Vietnam, 27 June 2018 - 29 June 2018.
Carrell J, Slatter T, Lewis R & Little U (2018) The compatibility of multilayer surface treatments with bio-lubricants base oils. 73rd Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2018 (pp 211-225)
Zhou L, Brunskill HP & Lewis R (2018) Characterization of ball-flat contact using ultrasound reflectometry: From static to dynamic. Proceedings of the 7th Asia-Pacific Workshop on Structural Health Monitoring, APWSHM 2018 (pp 562-579)
Six K, Trummer G, Buckley-Johnstone L & Lewis R (2018) Impact of low amounts of water in combination with wear debris/iron oxides on wheel-rail adhesion. The Dynamics of Vehicles on Roads and Tracks, Vol. 2 (pp 557-562)
Skipper WA, Chalisey A & Lewis R (2018) Particle characterisation of rail sand for understanding tribological behaviour. Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018 (pp 886-895)
Christoforou P, Lewis SR, Fletcher DI & Lewis R (2018) Benchmarking of premium rail material wear. Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018 (pp 172-180). Delft, The Netherlands, 24 September 2018 - 27 September 2018.
Santa JF, Christoforou P, Cuervo PA, Toro A, Beagles A & Lewis R (2018) Evaluation of rolling contact fatigue of rail materials in twin disc tests. Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018 (pp 838-843)
Earl S, Rankin KE, Lewis R, Smith L & Rainforth WM (2018) Comparison of squats and studs from different traffic environments. Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018 (pp 218-227)
Alturbeh H, Lewis R, Six K, Trummer G & Stow J (2018) Implementation of the water induced low adhesion creep force model (wilac) into the low adhesion braking dynamic optimisation for rolling stock model (Labrador). Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018 (pp 37-43)
Lanigan J, Krier P, Buckley-Johnstone L, White B, Ishizaka K, Cooke J, Barnard S, Ferriday P, Beagles A & Lewis R (2018) Towards a field test methodology for locomotive brake testing using a representative low adhesion simulation. Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018 (pp 495-502)
Cuervo P, Christoforou P, Lewis R, Beagles A, Santa JF & Toro A (2018) Twin disc assessment of wear regime transitions in R400ht-E8 Pairs. Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018 (pp 181-188)
Kempka R, Falconer R, Gutsulyak D & Lewis R (2018) Effects of oxide and water on friction of rail steel-new test method and friction mapping. Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018 (pp 464-473)
Ishizaka K, Lewis SR, Hammond D & Lewis R (2018) Investigation of leaf chemistry and leaf layer: Low adhesion mechanism. Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018 (pp 419-430)
Fukagai S, Brunskill H, Hunter A, Dwyer-Joyce R & Lewis R (2018) Measurement of rolling-sliding wheel/rail contact condition using full-scale rig with ultrasound. Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018 (pp 281-291)
Lewis R, Christoforou P, Wang WJ, Beagles A, Burstow M & Lewis SR (2018) Investigation of the influence of rail hardness on the wear of rail and wheel materials under dry conditions (ICRI wear mapping project). Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018 (pp 510-517)
Lewis SR, Fletcher DI, Beagles A, Ishizaka K, Buckley-Johnstone L, White B, Harmon M, Grigson C, Brunskill H, Zhou L , Kempka TR et al (2018) A Re-commissioned flexible full-scale wheel/rail test facility. Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018 (pp 518-528)
Lu P, Lewis SR, Fretwell-Smith S, Fletcher DI & Lewis R (2018) Laser cladding of rail; The effects of depositing material on lower rail grades. Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018 (pp 610-617)
Eadie DT, Harrison H, Kempka R, Lewis R, Keylin A & Wilson N (2018) Field assessment of friction and creepage with a new tribometer. Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018 (pp 208-217)
White B & Lewis R (2018) The development of a traction gel assessment method. Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018 (pp 1090-1095)
White B, Laity P, Holland C, Six K, Trummer G & Lewis R (2018) Iron oxide and water paste rheology and its effect on low adhesion in the wheel/rail interface. Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018 (pp 1084-1089)
Byers RA, Maiti R, Danby SG, Pang EJ, Mitchell B, Carré MJ, Lewis R, Cork MJ & Matcher SJ (2017) . Proceedings of SPIE, Vol. 10037
Morecroft R, Carré MJ, Lewis R, Mylon P, Matcher SJ, Toomey P, Goff JE & Maiti R (2017) . Optical Fibers and Sensors for Medical Diagnostics and Treatment Applications XVII
Carrell J, Lewis R & Slatter T (2016) The Interaction of Bio-lubricants with Elastomers, Tested Through Hanson Solubility Parameter and Stress Relaxation Tests.. Proceedings of 17th Nordic Symposium on Tribology - NORDTRIB 2016
Hu X, Maiti R, Lee Z, Byers R, Gerhardt L-C, Carre MJ, Lewis R, Franklin SE & Matcher SJ (2016) High Speed Optical Coherence Elastography for Human Skin Deformation Studies. Photonics West 2016
Hu X, Maiti R, Lee Z, Byers R, Gerhardt L-C, Carre MJ, Lewis R, Franklin SE & Matcher SJ (2016) Skin Surface and Sub-Surface Strain and Deformation Imaging using OCT and DIC. Photonics West 2016
Tasron D, Nasir SH, Troynikov O, Lewis R & Carré M (2016) Thermo-physiological comfort and frictional characteristics of running socks in different moisture conditions. Textile Bioengineering and Informatics Symposium Proceedings 2016 - 9th Textile Bioengineering and Informatics Symposium, TBIS 2016, in conjunction with the 6th Asian Protective Clothing Conference, APCC 2016 (pp 778-783)
Hu X, Maiti R, Boadi J, Li W, Carré MJ, Lewis R, Franklin SE & Matcher SJ (2016) . Optical Elastography and Tissue Biomechanics III
Carré M, Tasron D, Lewis R & Hashmi F (2016) . Procedia Engineering, Vol. 147 (pp 759-764)
Hu X, Maiti R, Liu X, Gerhardt LC, Lee ZS, Byers R, Franklin SE, Lewis R, Matcher SJ & Carré MJ (2016) . Optical Elastography and Tissue Biomechanics III
White BT, Lewis R, Olofsson U & Lyu Y (2016) The contribution of iron oxides to the wet-rail phenomenon. Civil-Comp Proceedings, Vol. 110
Lewis R, Wang WJ, Burstow M & Lewis SR (2016) Investigation of the influence of rail hardness on the wear of rail and wheel materials under dry conditions. Civil-Comp Proceedings, Vol. 110
Zhou L & Lewis R (2016) Wheel-rail endpost contact characterisation using ultrasound reflectometry. Civil-Comp Proceedings, Vol. 110
Lewis SR, Lewis R, Goodwin PS, Fretwell-Smith S, Fletcher DI & Murray K (2016) Laser cladding of railway track to promote wear/RCF, bend fatigue and IBJ Lipping resistance. Civil-Comp Proceedings, Vol. 110
Tasron D, Maiti R, Hemming M, Lewis R & Carré M (2016) . Procedia Engineering, Vol. 147 (pp 753-758)
El Shukri F & Lewis R (2015) An Experimental Investigation and Improvement of Insulated Rail Joints (IRJs). Proceedings of TurkeyTrib
Lewis SR, Lewis R, Goodwin PS, Fretwell-Smith S, Fletcher DI & Murray K (2015) Improving Rail Wear and RCF Performance using Laser Cladding. CM2015 - 10th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, 30 August 2015 - 3 September 2015.
White BT, Fisk J, Evans MD, Arnall AD, Armitage T, Fletcher DI & Lewis R (2015) A study into the effect of the presence of moisture at the wheel/rail interface during dew and damp conditions. CM 2015 - 10th International Conference on Contact Mechanics of Wheel / Rail Systems
Arnall AD, Fletcher DI & Lewis R (2015) Geospatial and temporal analysis of wheel slide events. CM 2015 - 10th International Conference on Contact Mechanics of Wheel / Rail Systems
Lewis SR, Riley S, Fletcher DI & Lewis R (2015) Optimisation of a Railway Sanding System, Part 1: Optimal Grain Entrainment into the Wheel/Rail Contact. CM2015
Galindo J, Lewis R, Carre MJ & Bradbury SR (2015) User-Informed re-design of a sonography system to reduce Work-Related Musculoskeletal Disorders. Proceedings of the Third European Conference on Design4Health 2015. 91̽��, 13 July 2015 - 16 July 2015.
El Shukri F & Lewis R (2015) An Experimental Investigation and Improvement of Insulated Rail Joints. Proceedings of SerbiaTrib2015
Fisk J, Armitage T, Lewis R, Fletcher D, Evans M & Arnall A (2015) Investigation into the effect of moisture on rail adhesion. Stephenson Conference Research for Railways 2015, Vol. 2015-April (pp 395-407)
Beagles AE, Beaty P, Fletcher DI, Lewis R & Temple BP (2015) Insulated rail joint enhancement: Testing and analysis. Stephenson Conference Research for Railways 2015, Vol. 2015-April (pp 463-476)
Evans MD, Lewis R, Hardwick C, Meierhofer A & Six K (2015) High pressure torsion testing of the wheel/rail interface. CM 2015 - 10th International Conference on Contact Mechanics of Wheel / Rail Systems
Evans MD & Lewis R (2015) Alternative twin-disc assessment of solid stick flange lubricants. CM 2015 - 10th International Conference on Contact Mechanics of Wheel / Rail Systems
Tasron D, Maiti R, Hemming M, Lewis R & Carré M (2015) . Footwear Science, Vol. 7(sup1) (pp S15-S16)
Cripps J, Awang Rosli NLB, Harris B & Lewis R (2015) (pp 305-310)
(2015) . Ultrasound, Vol. 23(2) (pp NP1-NP42)
Bostan LE, Lewis R, Carre MJ, MacNeil S & Franklin SE (2014) Studies on the Friction Coefficient of Human Skin and Skin Substitutes. Proceedings of International Conference on Biotribology (ICoBT)
Hardwick C & Lewis R (2014) The effects of alternative top of rail friction materials on pre-existing rolling contact fatigue cracks. Civil-Comp Proceedings, Vol. 104
Beaty P, Lewis R, Temple B & Marshall MB (2014) Experimental modelling of rail end lipping in insulated joints. Civil-Comp Proceedings, Vol. 104
Zhou L, Brunskill HP, Lewis R, Marshall MB & Dwyer-Joyce RS (2014) Dynamic characterisation of the wheel/rail contact using ultrasonic reflectometry. Civil-Comp Proceedings, Vol. 104
Brunskill H, Harper P & Lewis R (2013) The real-time measurement of wear using ultrasonic reflectometry. 5th World Tribology Congress, WTC 2013, Vol. 4 (pp 3224-3227)
Singleton R, Marshall MB, Lewis R & Evans G (2012) Rail Grinding for the 21st Century – Taking a Lead from the Aerospace Industry. CM2012
Hardwick CJ, Lewis R, Eadie DT & Rovira A (2012) Rail Wear: Effect of Third Body Materials. Railways 2012
Lewis R, Dwyer-Joyce RS, Lewis SR & Hardwick CJ (2012) Tribology of the Wheel/Rail Contact: The Effect of Third Body Materials. Railways 2012
Fernando US, Nott P, Graham G, Roberts A, Sheldrake TH, Brunskill H, Zhou L & Lewis R (2012) . Offshore Technology Conference
Meierhofer A, Hardwick C, Lewis R, Six K & Dietmaier P (2012) Third body layer - Experimental results and a model describing its influence on the traction coefficient. 9th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, CM 2012 (pp 335-343)
Hardwick C, Lewis R & Eadie DT (2012) Wheel and rail wear - Understanding the effect of third body materials. 9th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, CM 2012 (pp 394-401)
Hardwick C, Lewis R & Olofsson U (2012) Low adhesion due to oxide formation in the presence of NaCl. 9th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, CM 2012 (pp 309-317)
Lewis SR, Lewis R, Evans G & Buckley-Johnstone LE (2012) Assessment of railway grease performance using a twin-disc tester. 9th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, CM 2012 (pp 742-749)
Hardwick C, Lewis SR & Lewis R (2012) The effect of friction modifiers on wheel/rail isolation at low axle loads. 9th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, CM 2012 (pp 61-71)
Lewis SR, Lewis R & Richards P (2012) Investigation of the isolation and frictional properties of hydrophobic products on the railhead, when used to combat low adhesion. 9th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, CM 2012 (pp 737-741)
Lewis SR, Lewis R & Fletcher D (2012) Assessment of Laser Cladding as an Option for Repair of Rails. 9th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems (pp 380-385). Chengdu, China, 27 August 2012 - 30 August 2012.
Mylon P, Lewis R, Carre MJ & Martin N (2011) A Performance-Based Approach to Medical Glove Design. Proceedings of Design for Health Conference 2011
Lewis SR, Lewis R, Zhu Y, Abbasi S & Olofsson U (2011) The Modification of a Slip Resistance Meter for Measurement of Railhead Adhesion. International Heavy Haul Association Conference (IHHA 2011), Calgary, Canada, June 19th – 22nd
Lewis SR, lewis R, Eadie D, Cotter J & Lu X (2011) The Effect of Temperature, Humidity and Railhead Contamination on the Performance of Friction Modifiers; A Pin-on-Disk Study. International Heavy Haul Association Conference (IHHA 2011), Calgary, Canada, June 19th – 22nd
Slatter T, Lewis R & Broda M (2011) The Influence of Induction Hardening on the Impact Wear Resistance of Compacted Graphite Iron (pp 124-124)
Mylon P, Carre MJ, Lewis R & Martin N (2011) . Proceedings of the Human Factors and Ergonomics Society Annual Meeting, Vol. 55(1) (pp 700-704)
Lewis SR & Lewis R (2009) An Alternative Method for the Assessment of Railhead Traction. 8th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems (CM2009), Firenze, Italy, September 15th -18th
Lewis SR, Lewis R, Olofsson U, Cotter J, Lu X & Eadie D (2009) The Effect of Temperature, Humidity and Railhead Contamination on the Performance of Friction Modifiers; A Pin-on-Disk Study. 8th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems (CM2009), Firenze, Italy, September 15th -18th
Arias-Cuevas O, Li Z, Lewis R & Gallardo-Hernandez A (2009) Rolling-sliding laboratory tests of friction modifiers in leaf contaminated wheel-rail contacts. 2008 Proceedings of the STLE/ASME International Joint Tribology Conference, IJTC 2008 (pp 213-215)
Tassini N, Quost X, Lewis R, Dwyer-Joyce R, Ariaudo C & Kuka N (2009) A NUMERICAL MODEL OF TWIN DISC TEST ARRANGEMENT FOR EVALUATING RAILWAY WHEEL WEAR PREDICTION ALGORITHMS. PROCEEDINGS OF THE STLE/ASME INTERNATIONAL JOINT TRIBOLOGY CONFERENCE 2008 (pp 469-471)
Dwyer-Joyce RS, Yao C & Lewis R (2009) A COMPARISON OF THREE METHODS FOR THE MEASUREMENT OF WHEEL RAIL CONTACT. PROCEEDINGS OF THE STLE/ASME INTERNATIONAL JOINT TRIBOLOGY CONFERENCE 2008 (pp 541-543)
Pombo J, Quost X, Tassini N, Ambrósio J, Pereira M, Lewis R, Dwyer-Joyce R, Ariaudo C & Kuka N (2008) A railway wheel wear prediction tool based on multibody software. Proceedings of the Mini Conference on Vehicle System Dynamics, Identification and Anomalies (pp 159-168)
Tomlinson SE, Lewis R & Carre MJ (2008) Friction between players' hands and sports equipment. ENGINEERING OF SPORT 7, VOL 1 (pp 27-34)
Dwyer-Joyce RS, Yao C, Lewis R, Zhang J & Drinkwater BW (2008) A rail mounted ultrasonic sensor for contact patch measurement. JRC2008: PROCEEDINGS OF THE ASME/IEEE/ASCE JOINT RAIL CONFERENCE (pp 125-130)
Lewis R, Gallardo EA, Cotter J & Eadie DT (2008) The effect of friction modifiers on wheel/rail isolation. JRC2008: PROCEEDINGS OF THE ASME/IEEE/ASCE JOINT RAIL CONFERENCE (pp 109-117)
Dwyer-Joyce RS, Yao C & Lewis R (2008) Feasability study for an ultrasonic sensor for monitoring wheel flange contact. JRC2008: PROCEEDINGS OF THE ASME/IEEE/ASCE JOINT RAIL CONFERENCE (pp 119-124)
Quost X, Tassini N, Lewis R, Dwyer-Joyce R, Ariaudo C & Kuka N (2008) Predicting railway wheel wear starting from multi-body analysis: A preliminary study. JRC2008: PROCEEDINGS OF THE ASME/IEEE/ASCE JOINT RAIL CONFERENCE (pp 79-87)
Tomlinson SE, Lewis R & Carre MJ (2008) Improving the understanding of grip. IMPACT OF TECHNOLOGY ON SPORTS II (pp 129-134)
Slatter T & Lewis R (2006) Valve Recession - Investigating the Importance of Impact Wear. Tribology 2006: Surface Engineering and Tribology for Future Engines and Drivelines. London, UK, 12 July 2006 - 13 July 2006.
Lewis R, Hughes J, Lerner D & Walker L (2006) An integrated approach to introducing sustainable development design concepts to the curriculum. Proceedings of the International Conference on Innovation, Good Practice and Research in Engineering Education 2006, EE 2006 (pp 142-147)
Yoxall A, Bradbury SR, Carré MJ, Goh WT, Heppell JG, Hodzic A, Lewis R & Rodriguez-Falcon EM (2006) Better by design: Developing teaching concepts through group work. Proceedings of the International Conference on Innovation, Good Practice and Research in Engineering Education 2006, EE 2006 (pp 522-526)
Slatter T & Lewis R (2005) Valve Recession: From Experiment to Predictive Model. Experimental And Numerical Methods For Powertrain Development. Institution of Mechanical Engineers, London, UK, 28 September 2005 - 29 September 2005.
Lewis R, Bruni S, Ekberg A & Dwyer-Joyce RS (2005) . Joint Rail
Marshall MB, Lewis R & Dwyer-Joyce RS (2005) . Joint Rail
Dwyer-Joyce RS, Lewis R & Goodman M (2005) . Proceedings of the World Tribology Congress III - 2005 (pp 645-646)
Marshall MB, Lewis R, Dwyer-Joyce RS, Demilly F & Flament Y (2005) . Proceedings of the World Tribology Congress III - 2005 (pp 239-240)
Gonzalez-Valadez M, Dwyer-Joyce RS & Lewis R (2005) . Tribology and Interface Engineering Series, Vol. 48 (pp 313-320)
Lewis R, Marshall MB, Yoxall A & Canty LA (2005) . Proceedings of the World Tribology Congress III - 2005 (pp 869-870)
Marshall MB, Lewis R & Dwyer-Joyce RS (2005) The application of ultrasound as a tool for studying contact stresses in railway engineering component contacts. Proceedings of the 2005 ASME/IEEE Joint Rail Conference, Vol. 29 (pp 83-88)
Lewis R, Bruni S, Ekberg A & Dwyer-Joyce RS (2005) A design tool for railway wheels incorporating damage models and dynamic simulations. Proceedings of the 2005 ASME/IEEE Joint Rail Conference, Vol. 29 (pp 73-81)
Braghin F, Bruni S, Dwyer-Joyce R & Lewis R (2004) A fast and reliable algorithm for the estimation of railway wheel wear. Proceedings of the Mini Conference on Vehicle System Dynamics, Identification and Anomalies (pp 201-208)
Lewis R & Dwyer-Joyce RS (2004) Wheel-rail wear and surface damage caused by adhesion sanding. Transient Processes in Tribology, Vol. 43 (pp 731-741)
Marshall MB, Lewis R, Dwyer-Joyce RS, Olofsson U & Bjorklund S (2004) Ultrasonic characterisation of a wheel/rail contact. Transient Processes in Tribology, Vol. 43 (pp 151-158)
Ward A, Lewis R & Dwyer-Joyce RS (2003) Incorporating a railway wheel wear model into multi-body simulations of wheelset dynamics. TRIBOLOGICAL RESEARCH AND DESIGN FOR ENGINEERING SYSTEMS (pp 367-376)
Lewis R, Marshall MB & Dwyer-Joyce RS (2003) Ultrasonic characterisation of an interference fit. TRIBOLOGICAL RESEARCH AND DESIGN FOR ENGINEERING SYSTEMS (pp 449-458)
Lewis R & Dwyer-Joyce RS (2001) . Tribology Series, Vol. 39 (pp 629-640)
Tomlinson K, Clarke B, Karunakaran A, Slatter T, Carre M & Lewis R () The Effectiveness of Chalk as a Friction Modifier for Finger Pad Contact With Rocks of Varying Roughness. STLE 2023 Digital Proceedings. Park Ridge, IL, USA, 21 May 2023 - 25 May 2023.
Mesaritis M, Cuervo P, Santa JF, Toro A & Lewis R () . Civil-Comp Conferences, 22 August 2022 - 25 August 2022.
Lee ZS, T. Eadie D, Tuzik R, Chandrawinata M & Lewis R () . Civil-Comp Conferences, 22 August 2022 - 25 August 2022.
Butcher T, Lanigan J, Schmandt L & Lewis R () . Civil-Comp Conferences, 22 August 2022 - 25 August 2022.
ZHOU LU, BRUNSKILL HP & LEWIS R () . Structural Health Monitoring 2017, 12 September 2017 - 14 September 2017.
Buckley-Johnstone L, Harmon M, Lewis R, Hardwick C & Stock R () . Proceedings of the Third International Conference on Railway Technology: Research, Development and Maintenance, 5 April 2016 - 8 April 2016.
Zhou L, Brunskill HP, Lewis R, Marshall MB & Dwyer-Joyce RS () . Proceedings of the Second International Conference on Railway Technology: Research, Development and Maintenance, 8 April 2014 - 11 April 2014.
Green DA & Lewis R () . SAE Technical Paper Series
Ghassemieh E, Chaing W, Lewis R, Rowson J & Thompson C () Comparison of Tack of Pressure Sensitive Adhesives (PSA) at different temperatures. 3RD INTERNATIONAL CONFERENCE ON ADVANCED COMPUTATIONAL ENGINEERING AND EXPERIMENTING, ACE-X2009. Rome, Italy, 22 April 2009 - 22 April 2009.
Lewis R, Yoxall A, Marshall MB & Dwyer-Joyce RS () Comparison of Numerical and Ultrasonic Techniques for Quantifying Interference Fit Pressures. Proceedings of ICEM12, International Conference on Experimental Mechanics. Bari, Italy, 29 August 2004 - 2 September 2004.
Marshall MB, Lewis R & Dwyer-Joyce RS () Contact Pressure Measurement In Bolted Joints. Proceedings of ICEM12, International Conference on Experimental Mechanics. Bari, Italy, 29 August 2004 - 2 September 2004.
Bjorklund S, Oloffson U, Marshall MB, Lewis R & Dwyer-Joyce RS () Contact Pressure Calculations on Rough Measured Surfaces. Proceedings of the 9th International Conference on the Metrology and Properties of Engineering Surfaces. Halmstad, Sweden, 10 September 2003 - 11 September 2003.

Posters

Carrell J, Lewis R & Slatter T (2018) The Performance of Bio-Lubricants with Common and Novel Automotive Coating. Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2018.
Thornton R, Slatter T & Lewis R (2013) The effects of cryogenic treatment on the sliding wear performance and microstructure of ferrous alloys. 19th International Conference on Wear of Materials.

Presentations

Januschewsky M, Trummer G, Six K & Lewis R MODELLING ROLLING CONTACT FATIGUE CRACKING WITH A 2D TRUSS-LIKE DISCRETE ELEMENT METHOD. Melbourne, Australia.
Carrell J, Lewis R & Slatter T The Interaction of Bio-lubricants with Elastomers, Tested Through Hanson Solubility Parameter and Stress Relaxation Tests. The 17th Nordic Symposium on Tribology - NORDTRIB 2016, Aulanko, Hämeenlinna, Finland.

Other

Carre M & Lewis R (2012) . PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 226(J7), 587-587.

Preprints

Corniani G, Lee ZS, Carré MJ, Lewis R, Delhaye BP & Saal HP (2024) , eLife Sciences Publications, Ltd.
Corniani G, Lee ZS, Carré MJ, Lewis R, Delhaye BP & Saal HP (2024) , eLife Sciences Publications, Ltd.
Corniani G, Lee ZS, Carre MJ, Lewis R, Delhaye BP & Saal HP (2023) , Cold Spring Harbor Laboratory.

Grants

SBRI First of a Kind 2020 rail head cleaning project (July 2020 – Mar 2021) - £390,000
Network Rail funded track cleaning (July 2020-Dec 2020) - £350,000
Network Rail In2Track2 project on S&C friction modification (July 2020 – August 2021) - £80,000
MCL TopTrack Project (Nov 2019 – Oct 2022) - £60,000
Network Rail funded track trials of rail head cleaning (Sept 2019 – Jan 2020) - £199,000
ViF funded PhD on rail fatigue and wear testing (Oct 2019-Sept 2022) - £60,000
IIKE funded project to trial cryogenic track cleaning on a RHTT with NEXUS (Feb 2020 – Aug 2020) - £75,000
RSSB funded Adhesion Forecasting project with the Met Office (Feb 2019 – July 2019) - £103,000
EPSRC funded Centre to Centre Project (EP/S030476/1) with Leeds University (Oct 2019 – Sept 2023) - £670,000
RSSB funded Adhesion Forecasting project using AI with Ikon Risk Consulting (Apr 2019 – Mar 2020) - £62,000
ARN Innovation Fund Railhead Cleaning (September 2018 – December 2019) - £150,000
ViF funded TriboWearTherm project (Sept 2018 – Aug 2021) - £50,000
IIKE funded Railhead Cleaning project (Nov 2018 – Apr 2019) - £54,000
FRA funded project on rail stress measurement (Jan 2019 – Jun 2020) (with R.S. Dwyer-Joyce and A. Gower) - £116,27
RSSB funded Grant Scheme project with Network Rail to establish benchmarks tests for TOR products (Mar 2019 – Sept 2020) - £164,000
RAEng/RSSB funded Research Chair (Mar 2019 – Feb 2024) - £225,000
Network Rail sponsored iT-CDT project on rail grinding (Oct 2017 – Sept 2021) - £80,000
RSSB funded project to investigate leaf chemistry effects on low adhesion (iT-CDT studentship) (Oct 2017 – Sept 2021) - £80,000
RSSB funded project (T1149) to extend a low adhesion creep force model (LILAC) (Oct 2018 – Jul 2019) - £178,958
Network Rail project on ballast laying machine wear plates (Nov 2019 – Feb 2020) - £27,000
MDVSNPLUS skin tribology project (Jan 2019 – Apr 2019) - £25,000
UKRRIN equipment grant (Jan 2018 – Dec 2021) - £1,300,000
EPSRC funded Programme Grant – Friction: The Tribology Enigma (EP/R001766/1) (Sept 2017 – Aug 2022) - £3,400,000
RSSB funded PhD on leaf layers (Oct 2015 – Sept 2018) - £18,000
ViF sponsored project on Ballast testing - £17,857
FRA funded project to model the effects of top of rail friction modifiers in the wheel/rail interface (Oct 2017 – Sept 2018) - £221,428
RSSB funded project on optimised braking with dry-ice application (April 2017 – Oct 2018) - £500,000
RSSB funded project on optimised braking with water application (April 2017 – Oct 2018) - £500,000
RAEng Newton Fund Project (Colombia) (Mar 2016 – Feb 2018) - £30,000
LB Foster research grant to top-up a PhD studentship to investigate friction modifiers used in the wheel/rail contact. (Oct 2015 – Sept 2018) - £21,000
RSSB/FutureRailways funded project on optimised braking with water application (July 2015 – Dec 2015) - £93,000
RSSB/FutureRailways funded project on optimised braking with dry-ice application (July 2015 – Dec 2015) - £85,000
EPSRC funded project on laser cladding of the railhead (ALCHEMy) (June 2015-May 2018) - £900,000 (£450k at UoS/£450k at University of Bristol)
RSSB/Network Rail funded project to develop a model to predict the effect of water in the wheel/rail contact (Apr 2015 – Mar 2016) - £250,000
Network Rail funded project to investigate using ultrasound to determine longitudinal stress in a railhead (Jul 2014 – Dec 2015) - £30,000
RSSB/RRUKA research grant to support an EPSRC iCASE Award to investigate low adhesion mechanisms in the wheel/rail contact (Oct 2014 – Mar 2018) - £23,000
RSSB funded project to investigate lubrication of the wheel/rail contact (iT-CDT studentship) (Oct 2014 – Sept 2018) - £80,000

Teaching activities

Professor Lewis has most recently taught tribology and sustainable design to fourth years. He led the development of a ground breaking interdisciplinary sustainable design project based on local live development sites.

This involves Civil and Structural Engineering, Architecture, Town and Regional Planning and Landscape. Professor Lewis has won three University of 91̽�� Senate Teaching Awards for his innovation in teaching methods.