Majewski, Candice, Dr

Dr Candice Majewski

School of Mechanical, Aerospace and Civil Engineering

Senior Lecturer

Department Director of One University

c.majewski@sheffield.ac.uk
+44 114 222 7791

Sir Frederick Mappin Building

Full contact details

Dr Candice Majewski
School of Mechanical, Aerospace and Civil Engineering
Sir Frederick Mappin Building
Mappin Street
91̽��
S1 3JD

Profile

Candice is a senior lecturer in Mechanical Engineering at 91̽��, with a teaching and research focus on Additive Manufacturing (AM)/3D Printing.

Her passion for this area was inspired by a guest lecture during the final year of her undergraduate degree, which instantly made her realise this was what she wanted to do with her life.

Much of her work centres around understanding and optimising the interactions between materials and processes in AM processes involving powdered plastics – you can tell how excited she is by AM and its possibilities, as she even had her wedding bouquet produced using one of these processes!

Research interests

Candice has been involved in additive manufacturing since 2000, initially working with metal-based sintering processes. Since then she has moved towards polymer-based processes, again mainly focused around sintering technologies.

She has also managed several consultancy and contract research projects, using the knowledge gained from previous research projects to help steer the selection and development of new materials for the Laser Sintering process.

Her work has been recognised globally, most notably with the award of the 2011 International Outstanding Young Research in Freeform and Additive Manufacturing Award, and the Rapid Prototyping Journal's Outstanding Paper Award 2010.

In 2022 Candice was short-listed as one of five finalists for the TCT Women in 3D Printing Innovator Award.

Publications

Journal articles

Nar K, Majewski C & Lewis R (2023) . Wear, 522, 204873-204873.
Wingham J, Ahmed I, Islam MT, Shepherd J & Majewski C (2022) . Frontiers in Biomaterials Science, 1.
Nar K, Majewski C & Lewis R (2022) . Polymer Testing, 106.
Williams RJ, Al-Dirawi KH, Brown R, Burt J, Bayly AE & Majewski C (2021) . Additive Manufacturing, 47, 102361-102361.
Shackleford ASD, Williams RJ, Brown R, Wingham JR & Majewski C (2021) . Additive Manufacturing, 46.
Williams RJ, Fox L & Majewski C (2021) . Rapid Prototyping Journal, 27(4), 707-719.
Lou S, Zhu Z, Zeng W, Majewski C, Scott PJ & Jiang X (2021) . Surface Topography: Metrology and Properties, 9(1).
Zhu Z, Lou S & Majewski C (2020) . Additive Manufacturing, 36.
Wingham JR, Omran M, Shepherd J & Majewski C (2020) . Rapid Prototyping Journal.
Zhu Z & Majewski C (2020) . Materials & Design, 194.
Turner RD, Wingham JR, Paterson TE, Shepherd J & Majewski C (2020) . Scientific Reports, 10.
Wingham JR, Turner R, Shepherd J & Majewski C (2020) . Rapid Prototyping Journal.
Schäfer J, Quade A, Abrams KJ, Sigeneger F, Becker MM, Majewski C & Rodenburg C (2020) . Plasma Processes and Polymers, 17(1), 2070001-2070001.
Almansoori A, Abrams KJ, Ghali Al-Rubaye AD, Majewski C & Rodenburg C (2019) . Additive Manufacturing, 25, 297-306.
Almansoori AMM, Masters R, Abrams K, Schäfer J, Gerling T, Majewski C & Rodenburg C (2018) . Plasma Processes and Polymers, 15(7).
Almansoori A, Masters R, Abrams K, Schäfer J, Gerling T, Majewski C & Rodenburg C (2018) . Plasma Processes and Polymers, 15(7), 1870015-1870015.
Johnson AJ, Bingham GA & Majewski C (2018) . Rapid Prototyping Journal, 24(1), 130-137.
Almansoori A, Majewski C & Rodenburg C (2017) . JOM, 69(11), 2278-2285.
Johnson AA, Bingham GA & Majewski C (2017) . Virtual and Physical Prototyping.
Johnson AA, Bingham GA & Majewski C (2017) . The Police Journal: Theory, Practice and Principles, 90(1), 24-39.
Jarvis D, Griffiths PD & Majewski C (2016) . American Journal of Neuroradiology, 37(9), 1757-1761.
Allwood JM, Childs THC, Clare AT, De Silva AKM, Dhokia V, Hutchings IM, Leach RK, Leal-Ayala DR, Lowth S, Majewski CE , Marzano A et al (2016) . Journal of Materials Processing Technology, 229, 729-757.
Vasquez GM, Majewski CE, Haworth B & Hopkinson N (2014) . Additive Manufacturing, 1-4, 127-138.
Ellis A, Noble CJ, Hartley L, Lestrange C, Hopkinson N & Majewski C (2014) . Journal of Materials Research, 29(17), 2080-2085.
Majewski C, Plummer K, Vasquez M & Hopkinson N (2012) Study into the recyclability of a thermoplastic polyurethane powder for use in laser sintering. Proc IMechE, Part B: Journal of Engineering Manufacture.
Plummer K, Vasquez M, Majewski C & Hopkinson N (2012) . Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226(7), 1127-1135.
Majewski C & Hopkinson N (2011) . Rapid Prototyping Journal, 17(3), 176-180.
Majewski CE, Zarringhalam H, Toon D, Ajoku U, Hopkinson N & Caine MP (2009) . Journal of Materials Processing Technology, 209(6), 2855-2863.
Hopkinson N, Majewski CE & Zarringhalam H (2009) . CIRP Annals - Manufacturing Technology, 58(1), 197-200.
Zarringhalam H, Majewski C & Hopkinson N (2009) . Rapid Prototyping Journal, 15(2), 126-132.
Majewski C, Zarringhalam H & Hopkinson N (2008) . Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 222(9), 1055-1064.
Majewski CE, Oduye D, Thomas HR & Hopkinson N (2008) . Rapid Prototyping Journal, 14(3), 155-160.
Majewski CE, Hobbs BS & Hopkinson N (2007) . Virtual and Physical Prototyping, 2(2), 103-110.
Majewski CE & Hopkinson N (2007) . Plastics, Rubber and Composites, 36(10), 438-444.
Majewski C & Hopkinson N (2004) Reducing ejection forces for parts moulded into direct metal laser sintered tools. International Journal of Advanced Manufacturing Technology, 24(1-2), 16-23.
Majewski C & Hopkinson N (2003) . International Journal of Production Research, 41(3), 581-592.
Brown R, Holden A & Majewski C () . Applied Sciences, 14(19), 8667-8667.
Tarver J, Nar K & Majewski C () . Rapid Prototyping Journal.
Majewski C () . Journal of 3D Printing in Medicine.
Williams RJ, Smith PJ & Majewski C () . The International Journal of Advanced Manufacturing Technology.
Schäfer J, Quade A, Abrams KJ, Sigeneger F, Becker MM, Majewski C & Rodenburg C () . Plasma Processes and Polymers.
Majewski C, bingham G & Johnson A () Laser Sintered body armour – establishing guidelines for dual-layered stab protection. International Journal of Rapid Manufacturing.

Chapters

Al-Obaidi A & Majewski C (2019) , Transactions on Intelligent Welding Manufacturing (pp. 21-38). Springer Singapore
Majewski C (2011) , Evolutionary Computing in Advanced Manufacturing (pp. 197-234).
Toon D, Majewski C, Zarringhalam H, Hopkinson N & Caine M (2009) , The Engineering of Sport 7 (pp. 207-213). Springer Paris

Conference proceedings papers

Brown R, Morgan CT & Majewski CE (2020) Not just nylon… improving the range of materials for high speed sintering. Solid Freeform Fabrication 2018: Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2018 (pp 1487-1498)
Almansoori A, Seabright R, Majewski C & Rodenburg C (2017) . IOP Conference Series: Materials Science and Engineering, Vol. 195 (pp 012003-012003)
Liu Y, Beck S, Nicolleau F & Majewski CE (2013) Controlled multi-scale turbulence through the use of Laser Sintered Sierpinski Pyramids. 24th International SFF Symposium - An Additive Manufacturing Conference, SFF 2013 (pp 869-878)
Johnson A, Bingham GA & Majewski CE (2012) Establishing the performance requirements for stab resistant Additive Manufactured Body Armour (AMBA). 23rd Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2012 (pp 297-306)
Majewski CE & Hopkinson N (2010) Effect of section thickness and build orientation on tensile properties and material characteristics of laser sintered nylon-12 parts. 21st Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2010 (pp 422-434)
Majewski CE, Horsford PM & Hopkinson N (2009) Powder pre-conditioning for the LS process. 20th Annual International Solid Freeform Fabrication Symposium, SFF 2009 (pp 519-528)
Majewski CE, Toon D, Zarringhalam H, Hopkinson N & Caine MP (2008) Tailoring the mechanical properties of Selective Laser Sintered parts. 19th Annual International Solid Freeform Fabrication Symposium, SFF 2008 (pp 94-103)
Majewski CE, Zarringhalam H & Hopkinson N (2008) Effects of degree of particle melt and crystallinity in SLS Nylon-12 parts. 19th Annual International Solid Freeform Fabrication Symposium, SFF 2008 (pp 45-54)
Toon D, Majewski C, Zarringhalam H, Hopkinson N & Caine M (2008) A novel approach to personalising the mechanical properties of sprint footwear (P179). ENGINEERING OF SPORT 7, VOL 2 (pp 207-213)
al-obaidi & Majewski CANDICE () Ultrasonic Welding of Dissimilar Materials. 3rd IIW South-East European Welding Congress. Romania, 3 June 2015 - 5 June 2015.

Datasets

Wingham J, Turner R, Paterson T, Shepherd J & Majewski C (2020) .
Wingham J, Majewski C, Turner R & Shepherd J .
Wingham J, Turner R, Majewski C, Shepherd J & Paterson T .

Teaching activities

Module leader for MEC454 - Additive Manufacturing Principles and Applications.

In 2023 Candice was awarded the University's Education Award for Inclusivity and Diversity in Education, in recognition of her work developing and delivering an inclusivity-focused tutorial session to all first year students and their tutors across the Faculty.